Preliminary CAD

But first, a few words of caution on using the Preliminary CAD feature.

The purpose is to make the cutouts for gate geometry available for preliminary design only as requested by INCOE customers. For INCOE Hot Runner Systems designs, all final design information must come directly from INCOE for your specific project and application. To say in other words, do not cut steel based on the Preliminary CAD data available on our website. It is here to help early in the preliminary design phase and is not final engineering data.

If you are not familiar with INCOE Hot Runner Systems, our DF Nozzle Series or our gating styles, then STOP and consult with an INCOE Sales or Applications Engineer before proceeding.

MANDATORY DESIGN REVIEW
INCOE design data is subject to change and improvements. ALL design data contained digitally or in print is subject to an application review by INCOE’s application engineering department. INCOE assumes no liability for files used in advance of design approval. Always make certain to contact INCOE application engineering department to ensure correct design.

        Check this box to continue

 I have read these instructions above and understand I will wait for final design data from INCOE before fabrication.
Site Map Contact Patents